Dehumidifier use and maintenance methods
1. After the dehumidifier is used for a period of time, its air inlet filter will accumulate dust, and the dust accumulation is too dense and thick, which will affect the dehumidification effect. Therefore, it is necessary to clean the filter screen frequently to make the front and rear ventilation smooth.

2. For dehumidifiers that use humidity sensors, humidity sensors are generally placed on the ventilation surface. If the operating environment is not good, the humidity sensor will be blocked by dust and its sensor will not be able to display and control the humidity. After using for a period of time, the user can use a soft brush to remove the dust on the sensor and keep the sensor fresh.

3. When the dehumidifier is not used for a long time, unplug the power plug and clean the whole machine. Volatile oil, thinner and cleaning agent may cause damage to the machine, so please do not use it. The water tank should be drained to avoid the breeding of bacteria.

4. When the dehumidifier is used for a long time, stop it at least once a week, do some general maintenance, and check whether the filter screen of the machine needs to be cleaned, and whether there is any abnormal sound from the machine.

How to use a dehumidifier How to use and maintain a dehumidifier

5. The dehumidifier controlled by digital microcomputer is not allowed to be disassembled by non-professionals due to its precise control of the original device. Operators should not change functions frequently, which will reduce the service life.

6. Refrigeration dehumidifiers use the principle of compressor refrigeration to dehumidify. Since the compressor is a component with high technical content and the heart of the entire dehumidifier, the compressor has certain requirements on the quality of the power grid, and the compressor is often placed in Using it in an environment with unstable voltage will cause faults such as short circuit of the compressor coil. Therefore, when the voltage fluctuation is large, the dehumidifier should be stopped and a voltage stabilizer should be used instead. Dehumidifiers with voltage protection function controlled by microcomputer are not limited by the above conditions.

7. When installing the dehumidifier, the user should pay attention to matching the power cord that matches the wire diameter. If the power cord is too thin, the current when the machine is started is too large, which may easily cause an instantaneous voltage drop, resulting in a short circuit of the compressor and other related electrical components.

8. For dehumidifiers with duplex compressors, when they need to be moved and placed, the body should not be tilted more than 45°. It is forbidden to put it upside down or horizontally, which will easily cause the decoupling of the shock absorber spring inside the compressor, which will make the compressor make a lot of noise or cannot use it normally.

• Previous: Briefly describe the main functions of the fresh air dehumidifier
• Next: No Information